The Perfect Complement to the Series 2000 Workcentre.

***LIMITED OFFER***Spare 60 Tooth Blade WORTH £29.00

Pre-set bevel stops allow quick and precise bevel adjustment to 5 common angles. - An over-ride button enables free-range adjustment. - Repositionable height lever provides quick height adjustment, which can be fine-tuned using a micro adjustment knob. - Secure mountings. - Strong die-cast base ensure this is the saw most suited for bench mounting. -Alignment cams for late model Triton Workcentres and Saw Tables.

Features

1. Smooth, powerful 2400W* motor with needle and ball bearing construction.
2. Highly accurate calibration scale with quick-action bevel stops at 0, 15, 22 , 30, 45
3. Blade bevel trimmer
4. Inner and outer sighting notches for greater accuracy when hand-held
5. High quality 40 tooth Triton TCT blade
6. Ripping guide
7. Strong, die-cast aluminium baseplate machined for perfect accuracy
8. Locking rear pivot for extra stability
9. Sawdust extraction port
10. Onboard spanner
11. heavy-duty height adjustment assembly for excellent saw rigidity at all depth settings
12. Micro adjuster for accurate, one-handed blade height setting
13. Easy access height setting lever (repositionable)
14. Alignment cam locations for use with Triton saw benches
15. Spindle lock for easy blade changing Precise Settings -Blade angle trimmer allows initial fine tuning for perfect bevels. -The micro-adjustment knob allows up to 6mm of fine-tuning adjustment of the blade, from any selected height setting. - One-handed adjustment of the blade height, even from inside a dust bag. Micro-alignment of the saw A set of two alignment cams and mounting bases are supplied with the new pressed steel slide chassis of the Workcentre (s/no. 335,000+). They enable the baseplate to be finely adjusted left or right at the front and rear of the saw during initial setting up. And they make the Triton saw easy to fit, and ensure it is always perfectly aligned with the overhead guard support and the rip fence.

Motor: 2400W
Speed: 4100 min-1
Blade: 235mm (9in), 40 tooth Triton Premium TCT - 25mm arbor
Cut depth: 0 - 82mm 45 - 61mm
Bevel Adjustment: -1 to 46 Stops at 0, 15, 221/2, 30 & 45.s